Overview
SIST ISO 4790:1995 is an international standard specifying a test method for determining stresses in glass-to-glass sealings using stress birefringence. Developed by ISO Technical Committee ISO/TC 48 and Sub-Committee SC 5, this standard applies to the measurement of residual stresses that occur after sealing two glass pieces together. It enables precise evaluation of tensile or compressive stresses by analyzing optical path differences-critical for ensuring the structural reliability and quality of sealed glass assemblies.
The method involves using polarized light to detect birefringence caused by internal stresses, providing a non-destructive way to assess the mechanical integrity of glass joints post-sealing. This standard is essential for laboratories, manufacturers, and quality control professionals working with glassware and sealed glass components.
Key Topics
-
Stress Birefringence Principle
Glass develops birefringence under stress, altering light propagation. ISO 4790 measures the optical path difference caused by these stresses to calculate principal tensile or compressive stress values in the sealed glass interface.
-
Test Specimen Preparation
The standard outlines dimension requirements for glass pieces (typically around 4-10 mm in thickness and 20 mm in length) and specifies conditions such as surface flatness and roughness for reliable measurements. Proper sealing and controlled cooling rates are defined to ensure consistent stress formation.
-
Measurement Equipment and Methodology
Use of polarized light sources, stress-testing equipment, and polarization measuring devices with compensators allows detection of optical path differences to nanometer precision. The protocol covers verification of sealing quality, symmetry of stress distribution, and measuring stresses at specified locations relative to the sealed area.
-
Data Calculation and Interpretation
ISO 4790 provides equations to convert optical measurements into numerical stress values using known stress-optical coefficients standardized under ISO 10345. It also describes how to interpret signs (positive/negative) of stress depending on material properties and test setup.
-
Reporting Requirements
The standard mandates comprehensive test reports documenting variables such as glass types, cooling rates, testing temperatures, measured birefringence, calculated stresses, and observations about splits or defects affecting test results.
Applications
-
Quality Control of Sealed Glass Assemblies
Manufacturers of laboratory glassware, optical devices, and specialty glass components employ ISO 4790 to verify that glass-to-glass joints are free from harmful residual stresses that could compromise durability or performance.
-
Research and Development
Material scientists and engineers use this standard during product development to characterize how different sealing processes or glass formulations influence stress profiles, helping to optimize manufacturing parameters.
-
Failure Analysis
When sealed glass structures fail prematurely, stress birefringence measurements per ISO 4790 can identify excessive tensile or compressive stresses and guide corrective actions.
-
Regulatory Compliance
Adherence to ISO 4790 supports meeting international quality assurance requirements for glass products subjected to thermal and mechanical loads.
Related Standards
-
ISO 10345-1 and ISO 10345-2
These standards provide methods for determining the stress-optical coefficient (K), a key parameter needed for accurate stress calculation in ISO 4790 testing.
-
FEPA Standard 43-GB
This abrasive grain sizing standard is referenced for surface preparation guidelines to ensure consistent roughness on glass surfaces prior to sealing.
-
ISO/TC 48 Technical Committee Work
ISO 4790 complements other standards developed by the committee on laboratory glassware quality and testing methods.
Summary
SIST ISO 4790:1995 delivers a standardized, precise methodology for assessing stresses in glass-to-glass sealed joints via stress birefringence. By combining controlled specimen preparation, optical measurement techniques, and established calculation formulas, this standard helps ensure the mechanical integrity and performance of critical glass assemblies. Adoption of ISO 4790 benefits industries reliant on high-quality glass joints by enabling effective quality control, product development, and failure prevention. Keywords: glass-to-glass sealing, stress determination, stress birefringence, residual stresses, glass testing, optical path difference, tensile and compressive stress measurement, ISO 4790.
