Overview
ISO 5436-1:2000 - "Geometrical Product Specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 1: Material measures" specifies the characteristics of material measures (formerly called calibration specimens) used as measurement standards for calibration of instruments that measure surface texture by the profile method. The standard defines design requirements, types of standards (A–E), metrological characteristics and the content of measurement standard certificates. It is a GPS standard intended to support traceable calibration and verification of stylus and profile-based instruments.
Key topics and requirements
- Design requirements
- Material must be hard enough for service life and have a smooth, flat surface so it does not affect evaluation.
- Measurement window must accommodate traversal length needed for calibration.
- Five measurement standard types (A–E) and their purposes:
- Type A - Depth measurement standards (A1: wide grooves with flat bottoms; A2: wide grooves with rounded bottoms) for vertical profile calibration.
- Type B - Tip condition standards (B1, B2, B3) to assess stylus tip condition and sensitivity (e.g., B3 can use fine protruding edges such as uncoated razor blades ~0.1 µm edge width).
- Type C - Spacing measurement standards with repetitive groove waveforms (sinusoidal, triangular, arcuate) to test transmission characteristics across spacings and amplitudes.
- Type D - Roughness measurement standards (D1, D2) for overall instrument calibration using irregular profiles.
- Type E - Profile coordinate standards (E1: precision sphere/hemisphere; E2: precision prism) to calibrate the profile coordinate system.
- Metrological characteristics: Descriptions of parameters (depth, radius, Ra, RSm, apex angles), the basis of assessment per type, and certificate content requirements.
- Normative references: Links to ISO 3274, 4287, 4288, 12085, ISO 5436-2 and uncertainty guidance (GUM, VIM).
Applications and practical value
- Ensures traceable calibration of profilometers, stylus instruments and other profile-based surface texture measurement systems.
- Helps laboratories and manufacturers validate vertical and horizontal profile components, stylus condition, spatial resolution, and overall roughness performance.
- Applicable in quality control, metrology laboratories, instrument manufacturers, and industries with tight surface texture requirements (precision manufacturing, automotive, aerospace, medical devices).
Who should use this standard
- Metrology and calibration laboratories
- Quality and process engineers responsible for surface texture verification
- Instrument manufacturers and service providers producing calibration artifacts
- Standards and compliance teams implementing GPS-based measurement chains
Related standards
Keywords: ISO 5436-1:2000, surface texture, profile method, measurement standards, material measures, calibration, stylus instruments, profilometer, GPS, roughness.
