SIST ISO 6662:1996 PDF

Plums -- Guide to cold storage

Title (English):

SIST ISO 6662:1996

Plums -- Guide to cold storage

Document status:: Active
Format:: Electronic (PDF)
Number of pages:: 4
Publication date:: December 1, 1996
ICS:: 67.080.10
Technical committee:: KŽP - Agricultural food products

Document language:

enru

Delivery time:1–7 days

Price:31 €

Description (English):

The guidance desribes a method for certain varieties of Prunus dometica L., Prunus insitia L. and Prunus salicina Lindley, intended for delivery in fresh condition, and also for certain varieties intended for processing. It includes conditions of harvesting and putting into store, and optimum conditions for the main procedures. An annex A describes optimum temperatures for certain varieties. The limits of application are given in an annex B.

Technical details

SKU: SIST ISO 6662:1996

Abstract

Overview

ISO 6662:1983 - "Plums - Guide to cold storage" gives practical, internationally agreed guidance for handling and cold-storing selected plum cultivars (Prunus domestica, Prunus insititia and Prunus salicina) intended for fresh supply and some varieties intended for processing. The standard covers harvesting timing, packing, store conditions and optimum procedures, and includes Annex A (optimum temperatures and storage lives for many varieties) and Annex B (limits of application).

Key topics and technical requirements

Harvesting and packing
- Harvest during the coolest part of the day (best in the morning, dry weather).
- Fruits should be whole, healthy, clean and at a suitable maturity; stalks and natural bloom are preferred for fresh market fruit.
- Pack close to the place of picking into rigid containers (boxes) sized to avoid crushing lower layers.
Timing and handling
- Put fruit into cold store as soon as possible and not later than 12 hours after picking.
- Stores should be disinfected and free from odours; containers handled carefully and placed on pallets.
Cold store environment
- Air temperature: Maintain mean air temperature at 1 m above floor and in passages typically 0 to 1 °C for certain non-cold-resistant varieties; specific optimum temperatures by variety are in Annex A.
- Relative humidity: 90–95% recommended.
- Air circulation: High air movement (air circulation ratio per ISO 2169) of 30–50 until fruit reach 0–1 °C, then reduced to

Related standards

Mentioned in the description and other SIST standards

Overview

Key topics and technical requirements

Harvesting and packing
- Harvest during the coolest part of the day (best in the morning, dry weather).
- Fruits should be whole, healthy, clean and at a suitable maturity; stalks and natural bloom are preferred for fresh market fruit.
- Pack close to the place of picking into rigid containers (boxes) sized to avoid crushing lower layers.
Timing and handling
- Put fruit into cold store as soon as possible and not later than 12 hours after picking.
- Stores should be disinfected and free from odours; containers handled carefully and placed on pallets.
Cold store environment
- Air temperature: Maintain mean air temperature at 1 m above floor and in passages typically 0 to 1 °C for certain non-cold-resistant varieties; specific optimum temperatures by variety are in Annex A.
- Relative humidity: 90–95% recommended.
- Air circulation: High air movement (air circulation ratio per ISO 2169) of 30–50 until fruit reach 0–1 °C, then reduced to

SIST ISO 6662:1996 PDF

Technical details

Abstract

Overview

Key topics and technical requirements

Related standards

Abstract

Overview

Key topics and technical requirements

Related standards

Plums — Guide to cold storage

Fruits and vegetables -- Physical conditions in cold stores -- Definitions and measurement

Method to calculate GHG emissions at LNG plant (ISO 6338:2023)

Additive manufacturing of metals - Powder bed fusion (PBF) - In-situ coaxial photodiode monitoring for lack o…

Facility management - Development of the facility management organization (ISO 41002:2026)

Rigid cellular plastics - Determination of compressive properties (ISO 844:2026)

Processing of health care products - Information to be provided by the medical device manufacturer for the pr…

Ophthalmic optics - Uncut finished spectacle lenses - Part 4: Specifications and test methods for the propert…