Overview - SIST ISO 7146-1:2020 (Plain bearings - Part 1: General)
SIST ISO 7146-1:2020 defines, describes and classifies the visual and physical damage characteristics that occur in service on metallic, hydrodynamically lubricated plain bearings and journals. The standard focuses on damage forms with a well-defined appearance that can be attributed to likely causes with a high degree of certainty. It illustrates various appearances using photographs and diagrams and provides practical guidance for consistent damage characterization and analysis.
Keywords: SIST ISO 7146-1:2020, plain bearings, hydrodynamic bearings, metallic plain bearings, bearing damage, damage characterization, bearing inspection, tribology, failure analysis.
Key topics and technical content
- Definitions and terminology related to bearing damage and indicators of damage.
- Systematic description of damage causes and their characteristic appearances, including:
- Static overload and dynamic overload
- Wear by friction
- Overheating
- Insufficient lubrication (starvation)
- Contamination (particles and chemicals)
- Cavitation erosion
- Electroerosion
- Hydrogen diffusion
- Bond failure
- Relationship between observed appearance and probable cause (damage characterization).
- Detailed sections on:
- Damage to the bearing surface (typical appearances, possible causes, examples)
- Damage to the bearing back (including dynamic overload and wear)
- Special positions of damage appearances
- Practical guidelines for damage analysis, organized into a stepwise procedure (Step 1 through Step 5) to support systematic investigations.
- Illustrative content: photographs, diagrams and an informative annex with example use of tabular guidance.
Practical applications - who uses this standard
- Maintenance and reliability engineers conducting root-cause analysis of bearing failures.
- Tribologists and failure analysts diagnosing wear, erosion, contamination and electrochemical damage.
- OEMs and design engineers specifying bearing materials and lubrication systems for rotating machinery.
- Inspection teams, asset managers and laboratory technicians preparing visual and photographic reports for warranty or forensic investigations.
- Training and quality assurance programs aiming for consistent classification and reporting of bearing damage.
Related standards and notes
- SIST ISO 7146-1:2020 is Part 1 (General) of the ISO 7146 series; consult other parts of the series and related ISO standards on bearings and lubrication for complementary test methods, dimensional standards and material specifications.
- The document is primarily a descriptive and diagnostic aid - it does not replace test procedures but supports consistent visual classification and interpretation of bearing damage.
For reliable bearing maintenance, use SIST ISO 7146-1:2020 together with machine-specific maintenance practices, lubricant specifications and material data to achieve accurate failure diagnosis and effective corrective actions.
