EN ISO 10414-1:2008 PDF

Petroleum and natural gas industries - Field testing of drilling fluids - Part 1: Water-based fluids (ISO 10414-1:2008)

Title (English):

EN ISO 10414-1:2008

Petroleum and natural gas industries - Field testing of drilling fluids - Part 1: Water-based fluids (ISO 10414-1:2008)

Document status:: Active
Format:: Electronic (PDF)
Number of pages:: 100
Publication date:: November 19, 2008
Edition:: CEN EN 10414 edition 1 version 1
ICS:: 75.180.10

Document language:

enru

Delivery time:1–7 days

Price:135 €

Description (English):

ISO 10414-1:2008 provides standard procedures for determining the following characteristics of water-based drilling fluids: drilling fluid density (mud weight), viscosity and gel strength, filtration, water, oil and solids contents, sand content, methylene blue capacity, pH, alkalinity and lime content, chloride content and total hardness as calcium. ISO 10414-1:2008 provides additional test methods which may be used for chemical analysis for calcium, magnesium, calcium sulfate, sulfide, carbonate and potassium; determination of shear strength; determination of resistivity; removal of air drill-pipe corrosion; monitoring sampling, inspection and rejection rig-site sampling; calibration and verification of glassware, thermometers, viscometers, retort-kit cup and drilling-fluid balances; permeability-plugging testing at high temperature and high pressure for two types of equipment; and an example of a report form for water-based drilling fluid.

Technical details

Technical committee: CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
SKU: EN ISO 10414-1:2008

Abstract

Overview

EN ISO 10414-1:2008 - published by CEN as the European adoption of ISO 10414-1:2008 - is a field‑testing standard for water‑based drilling fluids used in the petroleum and natural gas industries. It specifies standard procedures, tests and reporting formats for rig‑site evaluation of drilling fluid properties to support safe, efficient drilling operations and quality control.

Key Topics

This Part 1 standard covers practical, rig‑site test methods and verification procedures, including:

Drilling fluid density (mud weight) - primary mud weight measurement and an alternative method
Viscosity and gel strength - Marsh funnel and direct‑indicating viscometer methods
Filtration - low‑temperature/low‑pressure and high‑temperature/high‑pressure (HTHP) testing
Water, oil and solids contents - separation and calculation procedures
Sand content and methylene blue capacity (clay activity indicator)
pH, alkalinity and lime content
Chloride ion content and total hardness expressed as calcium
Additional test methods and annexes for: chemical analysis (Ca, Mg, CaSO4, sulfide, carbonate, K), shear strength, resistivity, removal of air/gas prior to testing, sampling/inspection/rejection, rig‑site sampling procedures, calibration/verification of glassware/thermometers/viscometers/retort‑kit cup/drilling‑fluid balances, and permeability‑plugging (HTHP) testing using two types of equipment.
A sample water‑based drilling fluids report form is included for consistent rig reporting.

Applications

EN ISO 10414-1:2008 is used for:

Rig‑site quality control and real‑time monitoring of mud properties during drilling and well intervention
Mud engineer and drilling engineer decision support (stabilizing hole, managing wellbore pressure, solids control)
Laboratory and field technician procedures for consistent, reproducible test results
Regulatory compliance, contract specification verification and HSE risk mitigation related to drilling fluid performance

Typical users: mud engineers, drilling engineers, rig technicians, laboratory analysts, QA/QC personnel, and regulators in oil & gas exploration and production.

Related standards

Part of the ISO 10414 series and the body of standards developed under ISO/TC 67 (materials, equipment and offshore structures for petroleum and natural gas industries). Users should reference other relevant ISO/CEN drilling‑fluids and well‑control standards as required for comprehensive testing and compliance.

Keywords: EN ISO 10414-1:2008, water-based drilling fluids, field testing, mud weight, viscosity, HTHP, filtration, pH, alkalinity, methylene blue, rig-site sampling.

Related standards

Mentioned in the description and other EN standards

Abstract

Overview

Key Topics

This Part 1 standard covers practical, rig‑site test methods and verification procedures, including:

Drilling fluid density (mud weight) - primary mud weight measurement and an alternative method
Viscosity and gel strength - Marsh funnel and direct‑indicating viscometer methods
Filtration - low‑temperature/low‑pressure and high‑temperature/high‑pressure (HTHP) testing
Water, oil and solids contents - separation and calculation procedures
Sand content and methylene blue capacity (clay activity indicator)
pH, alkalinity and lime content
Chloride ion content and total hardness expressed as calcium
Additional test methods and annexes for: chemical analysis (Ca, Mg, CaSO4, sulfide, carbonate, K), shear strength, resistivity, removal of air/gas prior to testing, sampling/inspection/rejection, rig‑site sampling procedures, calibration/verification of glassware/thermometers/viscometers/retort‑kit cup/drilling‑fluid balances, and permeability‑plugging (HTHP) testing using two types of equipment.
A sample water‑based drilling fluids report form is included for consistent rig reporting.

Applications

EN ISO 10414-1:2008 is used for:

Rig‑site quality control and real‑time monitoring of mud properties during drilling and well intervention
Mud engineer and drilling engineer decision support (stabilizing hole, managing wellbore pressure, solids control)
Laboratory and field technician procedures for consistent, reproducible test results
Regulatory compliance, contract specification verification and HSE risk mitigation related to drilling fluid performance

Typical users: mud engineers, drilling engineers, rig technicians, laboratory analysts, QA/QC personnel, and regulators in oil & gas exploration and production.

Related standards

Part of the ISO 10414 series and the body of standards developed under ISO/TC 67 (materials, equipment and offshore structures for petroleum and natural gas industries). Users should reference other relevant ISO/CEN drilling‑fluids and well‑control standards as required for comprehensive testing and compliance.

Keywords: EN ISO 10414-1:2008, water-based drilling fluids, field testing, mud weight, viscosity, HTHP, filtration, pH, alkalinity, methylene blue, rig-site sampling.

EN ISO 10414-1:2008 PDF

Technical details

Abstract

Overview

Key Topics

Applications

Related standards

Related standards

Abstract

Overview

Key Topics

Applications

Related standards

Related standards

Petroleum and natural gas industries — Field testing of drilling fluids — Part 1: Water-based fluids

Petroleum and natural gas industries - Field testing of drilling fluids - Part 2: Oil-based fluids (ISO 10414…

Packaging - Conditioning for testing - Part 1: Paper sacks (ISO 6599-1:2026)

Ferrous materials - Heat treatments - Vocabulary (ISO 4885:2026)

Information security, cybersecurity and privacy protection - Controls, requirements, and guidance for persona…

Dentistry - Compatibility testing for metal-ceramic and ceramic-ceramic systems (ISO 9693:2026)

Leather - Physical and mechanical test methods for the determination of soiling - Part 1: Rubbing (Martindale…

Health informatics - Device interoperability - Part 10101: Point-of-care medical device communication - Nomen…