Overview

ISO 10524-1:2018 - "Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow‑metering devices" defines safety, design and testing requirements for pressure regulators used with medical gases (for example oxygen, medical air, oxygen/nitrous oxide mixtures) and gases used to drive surgical tools. The standard applies to regulators that are: fitted to refillable cylinders (working pressure up to 30 000 kPa / 300 bar); intended to be connected to cylinders by operators; integrated with flow‑metering devices; or supplied as part of medical equipment (e.g., anaesthetic workstations, ventilators, resuscitators). It covers design, construction, type testing, marking, packaging and required manufacturer information.

Key topics and technical requirements

ISO 10524-1:2018 addresses practical and safety-critical aspects of medical gas pressure regulators, including:

General design and construction requirements - materials, usability and safety features.
Inlet and outlet connections - requirements for cylinder connectors, pressure and/or flow outlets.
Outlet pressure and flow characteristics - specifications for pressure outlets, flow outlets, fixed orifices and adjustable regulators.
Flow‑metering devices - calibration, accuracy, stability, legibility and flow control requirements.
Pressure‑relief, filtration and leakage - provisions for overpressure protection, filtration of gases and acceptable internal/external leakage.
Mechanical strength and endurance - resistance of high‑ and low‑pressure sides, endurance testing and loosening torques.
Resistance to ignition - tests to reduce fire/ignition risk in oxygen‑rich environments.
Marking, colour coding and packaging - device identification, gas compatibility marking and durability of markings.
Type test methods and reporting - defined ambient/test gas conditions, performance tests, and test schedules for type approval.
Manufacturer information - required documentation and instructions supplied with the device.

Applications and who uses this standard

ISO 10524-1 is essential for manufacturers, regulators, procurement teams and biomedical engineers involved in the design, manufacture, testing, selection and maintenance of medical gas pressure regulators and integrated devices. Typical applications include:

Oxygen and medical air regulators for patient therapy and emergency care
Regulators integrated into anaesthesia machines, ventilators and resuscitators
Regulators used to drive pneumatic surgical tools
Hospital biomedical departments and third‑party testing labs performing type testing and certification

Compliance supports device safety, interoperability, and consistent performance in clinical settings.

Related standards

For a complete compliance strategy, consult other ISO standards and national regulations covering medical gas systems, device safety and medical device risk management (refer to the ISO catalogue or national standards bodies for applicable related documents).

Keywords: ISO 10524-1:2018, pressure regulators, medical gases, flow‑metering devices, medical gas regulators, regulator testing, cylinder regulators, medical equipment safety.

Overview

Key topics and technical requirements

ISO 10524-1:2018 addresses practical and safety-critical aspects of medical gas pressure regulators, including:

General design and construction requirements - materials, usability and safety features.
Inlet and outlet connections - requirements for cylinder connectors, pressure and/or flow outlets.
Outlet pressure and flow characteristics - specifications for pressure outlets, flow outlets, fixed orifices and adjustable regulators.
Flow‑metering devices - calibration, accuracy, stability, legibility and flow control requirements.
Pressure‑relief, filtration and leakage - provisions for overpressure protection, filtration of gases and acceptable internal/external leakage.
Mechanical strength and endurance - resistance of high‑ and low‑pressure sides, endurance testing and loosening torques.
Resistance to ignition - tests to reduce fire/ignition risk in oxygen‑rich environments.
Marking, colour coding and packaging - device identification, gas compatibility marking and durability of markings.
Type test methods and reporting - defined ambient/test gas conditions, performance tests, and test schedules for type approval.
Manufacturer information - required documentation and instructions supplied with the device.

Applications and who uses this standard

Oxygen and medical air regulators for patient therapy and emergency care
Regulators integrated into anaesthesia machines, ventilators and resuscitators
Regulators used to drive pneumatic surgical tools
Hospital biomedical departments and third‑party testing labs performing type testing and certification

Compliance supports device safety, interoperability, and consistent performance in clinical settings.

Related standards

Keywords: ISO 10524-1:2018, pressure regulators, medical gases, flow‑metering devices, medical gas regulators, regulator testing, cylinder regulators, medical equipment safety.

ISO 10524-1:2018 PDF

Technical details

Abstract

Overview

Key topics and technical requirements

Applications and who uses this standard

Related standards

Related standards

Abstract

Overview

Key topics and technical requirements

Applications and who uses this standard

Related standards

Related standards

Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flo…

Systems and software engineering — Software life cycle processes

Asset management — Vocabulary, overview and principles

Asset management — Asset management system — Requirements

Information technology — Radio frequency identification device conformance test methods — Part 2: Test method…

Information technology — Multimedia framework (MPEG-21) — Part 22: User Description

Milk — Determination of the lactoperoxidase activity — Photometric method (Reference method)

Carbonaceous materials for the production of aluminium — Cold and tepid ramming pastes — Expansion/shrinkage…