Overview
ISO 11500:2022 - "Hydraulic fluid power - Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light‑extinction principle" - defines a validated procedure for measuring particulate contamination in hydraulic‑fluid bottle samples using an automatic particle counter (APC) that operates on the light‑extinction (light‑blocking) principle. The standard applies to clear, homogeneous, single‑phase liquids and supports monitoring of fluid cleanliness in circulating systems, flushing operations, support equipment and test rigs, and packaged stock fluid. Measurements may be performed on undiluted samples or on samples diluted with a compatible diluent when APC coincidence error limits are exceeded.
Key topics and technical requirements
- Measurement principle: APC using light‑extinction to size and count particles; results reported as particle counts per unit volume.
- Equipment and sampling: APC with bottle sampler (minimum 8 channels) calibrated to ISO 11171; sample bottles qualified per ISO 3722; filtered gas (0.45 µm) if used to drive samples.
- Pre‑test controls: precautions for chemicals, electrical interference, magnetic stirrers, humidity and sample storage; glassware cleaning and verification procedures.
- Calibration and validation: APC calibration and operation in accordance with ISO 11171; statistical checks (Annex A) to verify instrument performance.
- Sample preparation: inspection, dispersion (mechanical shaker, ultrasonic bath), detection of water, and decision rules for sample dilution (volumetric or mass methods).
- Diluent and contamination control: acceptable diluents (Annex B), pre‑cleaning and anti‑static additives (Annex C) to minimize artifactual counts.
- Reporting: standard reporting formats and recommendations (Annex D); coding to contamination codes (ISO 4406 recommended).
- Specified test tools: density meter, calibrated electronic balance (0.1 mg resolution), hot plate (150 °C ±2 °C), ultrasonic bath, Class B volumetric glassware (ASTM E694 reference).
Applications and users
Who uses ISO 11500:2022:
- Hydraulic system engineers and maintenance teams monitoring fluid cleanliness and contamination control
- Test laboratories performing particle counting and fluid certification
- Reliability and asset‑management professionals validating flushing operations and system commissioning
- Quality control in fluid manufacturing and packaging
Practical benefits:
- Consistent, repeatable particle counts to inform maintenance intervals and component protection
- Objective assessment of flushing effectiveness and packaged fluid cleanliness
- Traceable results linked to calibration (ISO 11171) and contamination coding (ISO 4406)
Related standards
- ISO 11171 - Calibration of automatic particle counters for liquids
- ISO 3722 - Fluid sample containers: qualifying and controlling cleaning methods
- ISO 4406 - Method for coding contamination levels by solid particles
- ISO 5598 - Fluid power vocabulary
- ASTM E694 - Volumetric glassware specification
Keywords: ISO 11500:2022, hydraulic fluid power, automatic particle counting, light‑extinction, particulate contamination, APC calibration, fluid cleanliness, ISO 11171, ISO 4406.
Open preview (PDF)Hydraulic fluid power — Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle