ISO 1179-2:2022 PDF

Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)

Open preview (PDF)

Title (English):

ISO 1179-2:2022

Document status:: Active
Format:: Electronic (PDF)
Number of pages:: 8
Publication date:: November 10, 2022
Edition:: ISO IS 1179 edition 3 version 1
ICS:: 23.100.40

Delivery type:

Full version25 €Read online 24h10 €Read online 72h15 €

Document language:

enru

Delivery time:Immediate download

Price:25 €

Description (English):

This document specifies the dimensions, performance requirements and test procedures for heavy-duty (S series) and light-duty (L series) stud ends with threads, and the elastomeric sealing (type E) that is used with them as defined in ISO 228-1. Heavy-duty (S series) stud ends with type E sealing in accordance with this document can be used at working pressures up to 63 MPa (630 bar). Light-duty (L series) stud ends with type E sealing in accordance with this document can be used at working pressures up to 25 MPa (250 bar). The permissible working pressure depends upon size, materials, design, working conditions, application, etc. This document is applicable to connectors detailed in ISO 8434-1, ISO 8434-2 and ISO 8434-6. NOTE The Introduction gives recommendations for ports and stud ends to be used for new designs in hydraulic and pneumatic fluid power applications.

Technical details

Technical committee: ISO/TC 131/SC 4 - Connectors and similar products and components
SKU: ISO 1179-2:2022

Abstract

Overview

ISO 1179-2:2022 specifies dimensions, performance requirements and test procedures for stud ends with ISO 228-1 threads using elastomeric (type E) sealing. It covers two series: heavy‑duty (S series) and light‑duty (L series) stud ends for general use and fluid power. The standard defines geometry, materials for elastomeric seals, allowable working pressures, and mandatorily referenced test methods to verify safety and durability.

Key Topics

Thread and port interface: Stud ends conform to ISO 228-1 thread form and dimensional requirements (hex tolerances to h12).
Series and pressure ratings:
- S series (heavy‑duty): usable up to 63 MPa (630 bar) depending on size and materials.
- L series (light‑duty): usable up to 25 MPa (250 bar) depending on conditions.
Elastomeric seal material: Seals specified as NBR (nitrile) with hardness (90 ± 5) IRHD (ISO 48‑2) for petroleum‑based hydraulic fluids; manufacturer consultation required for other fluids/temperatures.
Performance testing: Burst and cyclic endurance tests must meet the pressures listed in Table 3 and be conducted in accordance with ISO 19879. Test sampling: three samples for burst tests and six for cyclic endurance.
Assembly and torque: Qualification test torques are provided for stud sizes (see standard); actual assembly torque depends on lubrication, coating and finish.
Safety note: The standard includes an interchangeability warning - mixing stud ends from ISO 1179 series with ports specified to other ISO series (for example ISO 6149) can create hazardous situations.

Applications

Design and manufacture of hydraulic and pneumatic connectors, fittings and hose assemblies that use ISO 228‑1 threaded stud ends with elastomeric seals.
Component qualification and quality control testing - ensuring burst, impulse and endurance performance for connectors used in high‑pressure systems (e.g., mobile hydraulics, industrial hydraulics, accumulators).
Procurement specifications and engineering drawings where defined interchangeability and pressure ratings are required.
Useful for OEMs, connector manufacturers, test laboratories and maintenance engineers who need to verify compliance or select appropriate sealing materials for operating fluids and temperatures.

Related standards

ISO 228-1 (thread dimensions)
ISO 19879 (test methods for hydraulic connections)
ISO 8434-1 / ISO 8434-2 / ISO 8434-6 (connectors to which ISO 1179-2 is applicable)
ISO 9974-2 (similar stud ends with elastomeric seals)
ISO 6149, ISO 16030 (recommendations for new hydraulic/pneumatic designs)
ISO 48-2, ISO 286-1/2, ISO 5598 (materials, tolerances, terminology)

Keywords: ISO 1179-2:2022, stud ends, ISO 228-1 threads, elastomeric sealing, type E, S series, L series, hydraulic connectors, NBR seal, burst test, ISO 19879.

Related standards

Standards mentioned in the description

Abstract

Overview

Key Topics

Thread and port interface: Stud ends conform to ISO 228-1 thread form and dimensional requirements (hex tolerances to h12).
Series and pressure ratings:
- S series (heavy‑duty): usable up to 63 MPa (630 bar) depending on size and materials.
- L series (light‑duty): usable up to 25 MPa (250 bar) depending on conditions.
Elastomeric seal material: Seals specified as NBR (nitrile) with hardness (90 ± 5) IRHD (ISO 48‑2) for petroleum‑based hydraulic fluids; manufacturer consultation required for other fluids/temperatures.
Performance testing: Burst and cyclic endurance tests must meet the pressures listed in Table 3 and be conducted in accordance with ISO 19879. Test sampling: three samples for burst tests and six for cyclic endurance.
Assembly and torque: Qualification test torques are provided for stud sizes (see standard); actual assembly torque depends on lubrication, coating and finish.
Safety note: The standard includes an interchangeability warning - mixing stud ends from ISO 1179 series with ports specified to other ISO series (for example ISO 6149) can create hazardous situations.

Applications

Design and manufacture of hydraulic and pneumatic connectors, fittings and hose assemblies that use ISO 228‑1 threaded stud ends with elastomeric seals.
Component qualification and quality control testing - ensuring burst, impulse and endurance performance for connectors used in high‑pressure systems (e.g., mobile hydraulics, industrial hydraulics, accumulators).
Procurement specifications and engineering drawings where defined interchangeability and pressure ratings are required.
Useful for OEMs, connector manufacturers, test laboratories and maintenance engineers who need to verify compliance or select appropriate sealing materials for operating fluids and temperatures.

Related standards

ISO 228-1 (thread dimensions)
ISO 19879 (test methods for hydraulic connections)
ISO 8434-1 / ISO 8434-2 / ISO 8434-6 (connectors to which ISO 1179-2 is applicable)
ISO 9974-2 (similar stud ends with elastomeric seals)
ISO 6149, ISO 16030 (recommendations for new hydraulic/pneumatic designs)
ISO 48-2, ISO 286-1/2, ISO 5598 (materials, tolerances, terminology)

Keywords: ISO 1179-2:2022, stud ends, ISO 228-1 threads, elastomeric sealing, type E, S series, L series, hydraulic connectors, NBR seal, burst test, ISO 19879.

ISO 1179-2:2022 PDF

Technical details

Abstract

Overview

Key Topics

Applications

Related standards

Related standards

Abstract

Overview

Key Topics

Applications

Related standards

Related standards

Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or m…

Dentistry - Elastomeric impression and bite registration materials (ISO 4823:2025)

Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connection…

Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O…

Textiles - Determination of short-chain chlorinated paraffins (SCCP) and middle-chain chlorinated paraffins (…

Connections for hydraulic fluid power and general use - Hose fittings - Part 2: Hose fittings with ISO 8434-1…

Metallic tube connections for fluid power and general use — Part 2: 37 degree flared fittings