ISO 13033:2013 PDF

Bases for design of structures — Loads, forces and other actions — Seismic actions on nonstructural components for building applications

Open preview (PDF)

Title (English):

ISO 13033:2013

Bases for design of structures — Loads, forces and other actions — Seismic actions on nonstructural components for building applications

Document status:: Active
Format:: Electronic (PDF)
Number of pages:: 43
Publication date:: July 29, 2013
Edition:: ISO IS 13033 edition 1 version 1
ICS:: 91.080.01

Delivery type:

Full version25 €Read online 24h10 €Read online 72h15 €

Document language:

enru

Delivery time:Immediate download

Price:25 €

Description (English):

ISO 13033:2013 establishes the means to derive seismic actions on nonstructural components and systems (NSCS) supported by or attached to new or existing buildings. It also provides procedures for the verification of NSCS seismic capacities. NSCS include architectural elements, mechanical and electrical systems, and building contents. ISO 13033:2013 is not a legally binding and enforceable code. It is a source document that is utilized in the development of codes of practice by the competent authority responsible for issuing structural design regulations. It is intended for application by regional and national standards committees when preparing standards for the seismic performance of NSCS. ISO 13033:2013 does not specifically cover industrial facilities, including nuclear power plants, since these are dealt with separately in other International Standards. However, the principles in ISO 13033:2013 can be appropriate for the derivation of seismic actions for NSCS in such facilities.

Technical details

Technical committee: ISO/TC 98/SC 3 - Loads, forces and other actions
SKU: ISO 13033:2013

Abstract

Overview

ISO 13033:2013 - "Bases for design of structures - Seismic actions on nonstructural components for building applications" - provides a systematic framework to derive seismic actions on nonstructural components and systems (NSCS) and to verify their seismic capacity. It covers architectural elements, mechanical and electrical systems, and building contents supported by or attached to buildings. ISO 13033:2013 is a guidance standard (not a legally binding code) intended for use by regional and national standards committees, designers and regulators and complements ISO 3010 (seismic actions on structures).

Key topics and requirements

Scope and applicability
- Defines NSCS that require evaluation (e.g., falling hazards, evacuation impediments, hazardous materials, essential post‑earthquake functions, major financial loss).
- Exclusions include typical furnishings, temporary/relocatable items and some low-hazard situations.
Seismic demand mechanisms
- Inertial demand (mass-induced forces), relative displacement demand (drift-induced movements), and impact demand (component collisions).
- Relation of NSCS demands to building response and assumptions when NSCS do or do not influence global structural response.
Quantification methods
- Procedures for dynamic and equivalent static analyses to obtain elastic seismic demands and floor response spectra.
- Guidance on amplification factors (floor response/height factor, component resonance), response modification and overstrength considerations.
Verification of NSCS
- Multiple verification routes: design analysis, seismic qualification testing (including shake-table testing), documented post-earthquake performance (experience data), or combinations.
- Requirements for verifying seismic load paths and anchorage between NSCS and the building structural system.
Quality assurance
- Procedures for QA in design and construction, including annex guidance on identification, anchorage principles, testing methods and inspection.

Practical applications

Specifying seismic loads and verification criteria for HVAC equipment, suspended ceilings, piping, electrical switchgear, cladding, laboratory equipment and building contents.
Developing or updating national/regional codes and technical regulations for nonstructural seismic performance.
Designing anchors, restraints and bracing systems to meet seismic capacity and post-earthquake functionality goals.
Preparing procurement, test and inspection requirements for seismic qualification of components.

Who uses ISO 13033:2013

Structural and MEP engineers, architects, seismic specialists
Standards committees and code developers
Manufacturers and test laboratories performing seismic qualification
Facility managers planning mitigation/retrofit of NSCS
Building inspectors and quality assurance teams

Related standards

ISO 3010:2001 - Basis for design of structures - Seismic actions on structures (companion document)

Keywords: ISO 13033:2013, seismic actions, nonstructural components, NSCS, seismic design, seismic verification, floor response spectra, seismic qualification testing, anchorage, relative displacement.

Related standards

Mentioned in the description and other ISO standards

Abstract

Overview

Key topics and requirements

Scope and applicability
- Defines NSCS that require evaluation (e.g., falling hazards, evacuation impediments, hazardous materials, essential post‑earthquake functions, major financial loss).
- Exclusions include typical furnishings, temporary/relocatable items and some low-hazard situations.
Seismic demand mechanisms
- Inertial demand (mass-induced forces), relative displacement demand (drift-induced movements), and impact demand (component collisions).
- Relation of NSCS demands to building response and assumptions when NSCS do or do not influence global structural response.
Quantification methods
- Procedures for dynamic and equivalent static analyses to obtain elastic seismic demands and floor response spectra.
- Guidance on amplification factors (floor response/height factor, component resonance), response modification and overstrength considerations.
Verification of NSCS
- Multiple verification routes: design analysis, seismic qualification testing (including shake-table testing), documented post-earthquake performance (experience data), or combinations.
- Requirements for verifying seismic load paths and anchorage between NSCS and the building structural system.
Quality assurance
- Procedures for QA in design and construction, including annex guidance on identification, anchorage principles, testing methods and inspection.

Practical applications

Specifying seismic loads and verification criteria for HVAC equipment, suspended ceilings, piping, electrical switchgear, cladding, laboratory equipment and building contents.
Developing or updating national/regional codes and technical regulations for nonstructural seismic performance.
Designing anchors, restraints and bracing systems to meet seismic capacity and post-earthquake functionality goals.
Preparing procurement, test and inspection requirements for seismic qualification of components.

Who uses ISO 13033:2013

Structural and MEP engineers, architects, seismic specialists
Standards committees and code developers
Manufacturers and test laboratories performing seismic qualification
Facility managers planning mitigation/retrofit of NSCS
Building inspectors and quality assurance teams

Related standards

ISO 3010:2001 - Basis for design of structures - Seismic actions on structures (companion document)

ISO 13033:2013 PDF

Technical details

Abstract

Overview

Key topics and requirements

Practical applications

Who uses ISO 13033:2013

Related standards

Related standards

Abstract

Overview

Key topics and requirements

Practical applications

Who uses ISO 13033:2013

Related standards

Related standards

Basis for design of structures — Seismic actions on structures

Bases for design of structures — Seismic actions on structures

Systems and software engineering — Software life cycle processes

Asset management — Vocabulary, overview and principles

Asset management — Asset management system — Requirements

Information technology — Radio frequency identification device conformance test methods — Part 2: Test method…

Information technology — Multimedia framework (MPEG-21) — Part 22: User Description

Milk — Determination of the lactoperoxidase activity — Photometric method (Reference method)