ISO 16784-1:2006 PDF

Corrosion of metals and alloys — Corrosion and fouling in industrial cooling water systems — Part 1: Guidelines for conducting pilot-scale evaluation of corrosion and fouling control additives for open recirculating cooling water systems

Open preview (PDF)

Title (English):

ISO 16784-1:2006

Document status:: Withdrawn
Format:: Electronic (PDF)
Number of pages:: 14
Publication date:: March 14, 2006
Edition:: ISO IS 16784 edition 1 version 1
ICS:: 77.060

Delivery type:

Full version25 €Read online 24h10 €Read online 72h15 €

Document language:

enru

Delivery time:Immediate download

Price:25 €

Description (English):

ISO 16784-1:2006 applies to corrosion and fouling in industrial cooling water systems. ISO 16784-1:2006 covers the criteria that must be defined and implemented in a pilot-scale testing programme to select water treatment programmes for use in specific recirculating cooling water systems. ISO 16784-1:2006 covers only open recirculating cooling water systems. Closed cooling systems and once-through cooling water systems are specifically excluded. The test criteria established in ISO 16784-1:2006 are not intended to govern the type of bench and pilot-scale testing normally carried out by water treatment companies as part of their proprietary product-development programmes. However, water treatment companies may choose to use the criteria in ISO 16784-1:2006 as guidelines in the development of their own product-development test procedures.

Technical details

Technical committee: ISO/TC 156 - Corrosion of metals and alloys
SKU: ISO 16784-1:2006

Abstract

Overview

ISO 16784-1:2006 provides guidelines for conducting pilot-scale evaluation of corrosion and fouling control additives for open recirculating cooling water systems. The standard defines the criteria to plan and run pilot tests used to select and optimize water treatment programmes intended to inhibit corrosion, mineral scaling, microbiological fouling, and related deposit problems in industrial cooling systems. Closed systems and once‑through systems are excluded; the focus is on open recirculating systems with shell‑and‑tube heat exchangers (cooling water on the tube side).

Key topics and requirements

Types of testing: laboratory/off‑site, on‑site, and on‑line approaches and how they complement each other.
Test unit design parameters: construction materials for pilot towers and test coupons, and the need to replicate plant materials where relevant.
Operating parameters: surface temperature, water velocity, residence time and how to align these with field conditions.
Water quality: guidance for using natural vs synthetic makeup waters, handling fresh, brackish and seawater, and recycle/reuse supplies.
Contamination sources: process leaks, biological matter, airborne solids/gases and their effect on pilot results.
Measured parameters: corrosion metrics, fouling/deposition quantification, microbiologically influenced corrosion (MIC) considerations, and evaluation of treatment additives.
Pilot test facility design and operation: objectives, simulating site‑specific environments, compromises in scaling, documentation, repeatability and record keeping.

Practical applications

Validate and compare candidate corrosion and fouling control additives under conditions representative of a specific plant.
Optimize chemical dosing strategies for cooling towers and shell‑and‑tube heat exchangers in power plants, refineries, chemical plants, HVAC and large commercial systems.
Support procurement and specification decisions for water treatment programs by providing pilot‑scale performance evidence.
Use as an objective framework for regulatory or contract requirements when selecting treatment chemicals.

Who should use this standard

Cooling system owners/operators and plant engineers evaluating treatment options.
Water treatment companies developing or validating additives (as guidance for product evaluation).
Test laboratories and consultants conducting pilot‑scale evaluations.
Environmental compliance and maintenance teams assessing long‑term system performance.

Related standards

ISO 16784‑2 - Evaluation of the performance of cooling water treatment programmes using a pilot‑scale test rig.
ISO 8044 - Corrosion of metals and alloys - Basic terms and definitions.

Keywords: ISO 16784-1:2006, corrosion, fouling, pilot-scale testing, industrial cooling water systems, open recirculating cooling water, water treatment additives, cooling towers, heat exchangers.

Related standards

Mentioned in the description and other ISO standards

Abstract

Overview

Key topics and requirements

Types of testing: laboratory/off‑site, on‑site, and on‑line approaches and how they complement each other.
Test unit design parameters: construction materials for pilot towers and test coupons, and the need to replicate plant materials where relevant.
Operating parameters: surface temperature, water velocity, residence time and how to align these with field conditions.
Water quality: guidance for using natural vs synthetic makeup waters, handling fresh, brackish and seawater, and recycle/reuse supplies.
Contamination sources: process leaks, biological matter, airborne solids/gases and their effect on pilot results.
Measured parameters: corrosion metrics, fouling/deposition quantification, microbiologically influenced corrosion (MIC) considerations, and evaluation of treatment additives.
Pilot test facility design and operation: objectives, simulating site‑specific environments, compromises in scaling, documentation, repeatability and record keeping.

Practical applications

Validate and compare candidate corrosion and fouling control additives under conditions representative of a specific plant.
Optimize chemical dosing strategies for cooling towers and shell‑and‑tube heat exchangers in power plants, refineries, chemical plants, HVAC and large commercial systems.
Support procurement and specification decisions for water treatment programs by providing pilot‑scale performance evidence.
Use as an objective framework for regulatory or contract requirements when selecting treatment chemicals.

Who should use this standard

Cooling system owners/operators and plant engineers evaluating treatment options.
Water treatment companies developing or validating additives (as guidance for product evaluation).
Test laboratories and consultants conducting pilot‑scale evaluations.
Environmental compliance and maintenance teams assessing long‑term system performance.

Related standards

ISO 16784‑2 - Evaluation of the performance of cooling water treatment programmes using a pilot‑scale test rig.
ISO 8044 - Corrosion of metals and alloys - Basic terms and definitions.

Keywords: ISO 16784-1:2006, corrosion, fouling, pilot-scale testing, industrial cooling water systems, open recirculating cooling water, water treatment additives, cooling towers, heat exchangers.

ISO 16784-1:2006 PDF

Technical details

Abstract

Overview

Key topics and requirements

Practical applications

Who should use this standard

Related standards

Related standards

Abstract

Overview

Key topics and requirements

Practical applications

Who should use this standard

Related standards

Related standards

Corrosion of metals and alloys — Corrosion and fouling in industrial cooling water systems — Part 2: Evaluati…

Corrosion of metals and alloys - Vocabulary (ISO 8044:2024)

Systems and software engineering — Software life cycle processes

Asset management — Vocabulary, overview and principles

Asset management — Asset management system — Requirements

Information technology — Radio frequency identification device conformance test methods — Part 2: Test method…

Information technology — Multimedia framework (MPEG-21) — Part 22: User Description

Milk — Determination of the lactoperoxidase activity — Photometric method (Reference method)