Overview

ISO 18243:2025 - Electrically propelled mopeds and motorcycles - Test specifications and safety requirements for lithium‑ion battery systems - defines standardized test procedures and safety requirements for lithium‑ion battery packs and systems used in electrically propelled mopeds and motorcycles. The standard enables objective determination and comparison of performance and safety characteristics, and supports configuring a dedicated test plan agreed between customer and supplier. Note: cell‑level testing is covered by the IEC 62660 series and electrically power‑assisted cycles (EPAC) are not considered mopeds under this document.

Key topics and technical requirements

ISO 18243 organizes requirements and test procedures across safety, mechanical, climatic, electrical, functional and performance domains:

Safety and general requirements
- Evidence of leakage, rupture, fire or explosion; isolation resistance checks.
Mechanical tests
- Vibration, mechanical shock and drop testing to assess structural integrity.
Climatic tests
- Thermal shock, dewing (condensation) and salt‑spray exposure to verify environmental robustness.
Simulated accident tests
- Immersion into water and exposure to fire to evaluate behavior under crash or post‑crash scenarios.
Electrical tests
- Isolation resistance and short‑circuit protection to confirm electrical safety.
Functional protection
- Overcharge, overdischarge, overcurrent, internal overheating and low‑temperature protections to ensure safe operation.
Performance tests
- Energy/capacity at different temperatures and discharge rates, power and internal resistance (pulse power characterization), state‑of‑charge (SOC) loss at no load and storage, and cycle life measurement methodologies.
Test plan and preconditioning
- Guidance on DUT (device under test) preparation, preconditioning cycles, standard cycle procedures and measurement accuracy.

ISO 18243 provides detailed test sequences and procedures rather than prescriptive numerical limits; it is intended to be used to set up tailored test plans.

Practical applications and users

Who benefits:

EV motorcycle and moped manufacturers (OEMs) validating battery pack safety and performance
Battery pack/system suppliers demonstrating compliance and supporting supplier‑customer agreements
Independent test laboratories creating standardized test reports for comparative evaluation
Regulatory bodies and certification agencies referencing harmonized test methods
Safety and reliability engineers assessing failure modes and environmental resilience

Practical uses:

Creating supplier acceptance test plans
Comparing battery packs from different vendors under consistent conditions
Supporting homologation, warranty and safety documentation
Informing design changes to improve thermal, mechanical and electrical safety

Related standards

IEC 62660 series - cell‑level testing for lithium‑ion cells
Other ISO/IEC/UN regulations referenced in the normative references and national homologation requirements

Keywords: ISO 18243, lithium‑ion battery systems, mopeds, motorcycles, battery pack testing, safety requirements, performance testing, battery cycle life, thermal shock, short circuit protection, overcharge protection.

Overview

Key topics and technical requirements

ISO 18243 organizes requirements and test procedures across safety, mechanical, climatic, electrical, functional and performance domains:

Safety and general requirements
- Evidence of leakage, rupture, fire or explosion; isolation resistance checks.
Mechanical tests
- Vibration, mechanical shock and drop testing to assess structural integrity.
Climatic tests
- Thermal shock, dewing (condensation) and salt‑spray exposure to verify environmental robustness.
Simulated accident tests
- Immersion into water and exposure to fire to evaluate behavior under crash or post‑crash scenarios.
Electrical tests
- Isolation resistance and short‑circuit protection to confirm electrical safety.
Functional protection
- Overcharge, overdischarge, overcurrent, internal overheating and low‑temperature protections to ensure safe operation.
Performance tests
- Energy/capacity at different temperatures and discharge rates, power and internal resistance (pulse power characterization), state‑of‑charge (SOC) loss at no load and storage, and cycle life measurement methodologies.
Test plan and preconditioning
- Guidance on DUT (device under test) preparation, preconditioning cycles, standard cycle procedures and measurement accuracy.

ISO 18243 provides detailed test sequences and procedures rather than prescriptive numerical limits; it is intended to be used to set up tailored test plans.

Practical applications and users

Who benefits:

EV motorcycle and moped manufacturers (OEMs) validating battery pack safety and performance
Battery pack/system suppliers demonstrating compliance and supporting supplier‑customer agreements
Independent test laboratories creating standardized test reports for comparative evaluation
Regulatory bodies and certification agencies referencing harmonized test methods
Safety and reliability engineers assessing failure modes and environmental resilience

Practical uses:

Creating supplier acceptance test plans
Comparing battery packs from different vendors under consistent conditions
Supporting homologation, warranty and safety documentation
Informing design changes to improve thermal, mechanical and electrical safety

Related standards

IEC 62660 series - cell‑level testing for lithium‑ion cells
Other ISO/IEC/UN regulations referenced in the normative references and national homologation requirements

ISO 18243:2025 PDF

Technical details

Abstract

Overview

Key topics and technical requirements

Practical applications and users

Related standards

Related standards

Abstract

Overview

Key topics and technical requirements

Practical applications and users

Related standards

Related standards

Secondary lithium-ion cells for the propulsion of electric road vehicles - Candidate alternative test methods…

Electrically propelled mopeds and motorcycles - Test specifications and safety requirements for lithium-ion b…

Systems and software engineering — Software life cycle processes

Asset management — Vocabulary, overview and principles

Asset management — Asset management system — Requirements

Information technology — Radio frequency identification device conformance test methods — Part 2: Test method…

Information technology — Multimedia framework (MPEG-21) — Part 22: User Description

Milk — Determination of the lactoperoxidase activity — Photometric method (Reference method)