ISO 19232-5:2018 PDF

Non-destructive testing — Image quality of radiographs — Part 5: Determination of the image unsharpness and basic spatial resolution value using duplex wire-type image quality indicators

Open preview (PDF)

Title (English):

ISO 19232-5:2018

Non-destructive testing — Image quality of radiographs — Part 5: Determination of the image unsharpness and basic spatial resolution value using duplex wire-type image quality indicators

Document status:: Active
Format:: Electronic (PDF)
Number of pages:: 11
Publication date:: August 16, 2018
Edition:: ISO IS 19232 edition 3 version 1
ICS:: 19.100

Delivery type:

Full version25 €Read online 24h10 €Read online 72h15 €

Document language:

enru

Delivery time:Immediate download

Price:25 €

Description (English):

This document specifies a method of determining the total image unsharpness and basic spatial resolution of radiographs and radioscopic images. The IQI with up to 13 wire pairs can be used effectively with tube voltages up to 600 kV. The IQI with more than 13 wire pairs can be used effectively at tube voltages lower than 225 kV. When using source voltages in the megavolt range, it is possible that the results are not be completely satisfactory.

Technical details

Technical committee: ISO/TC 135/SC 5 - Radiographic testing
SKU: ISO 19232-5:2018

Abstract

Overview

ISO 19232-5:2018 - Non‑destructive testing (NDT) - Image quality of radiographs - Part 5 specifies a standardized method for determining total image unsharpness and basic spatial resolution of radiographs and radioscopic images using duplex wire‑type image quality indicators (IQIs). The standard defines IQI construction, marking and conformity requirements, and practical evaluation procedures for both film and digital detectors.

Key topics and requirements

Duplex wire‑type IQI design: A series of up to 13 duplex wire pairs mounted in a rigid transparent holder. Wires D1–D3 are tungsten; remaining elements are platinum. Wire diameter (d) equals spacing between wires.
Measurement concepts:
- Total image unsharpness (UT) is given by 2·d.
- Basic spatial resolution (SRb) equals half of the measured unsharpness.
- Linepair/mm value is 1/(2·d).
Wire sizes: Duplex elements span fine to coarse pairs (e.g., wire diameters/spacing from ~0.05 mm to ~0.80 mm), enabling resolution readings up to ~10 lp/mm for the finest pairs (values per Table 1 in the standard).
Use limits by X‑ray tube voltage:
- IQIs with up to 13 wire pairs effective up to 600 kV.
- IQIs with more than 13 wire pairs intended for tube voltages <225 kV. Results may be unsatisfactory in the megavolt range.
Evaluation methods:
- Visual evaluation on film/monitor (magnification up to 4×; use >2× lens for very fine pairs).
- Digital evaluation with profile function: determine first duplex pair with

Related standards

Other ISO standards

Overview

Key topics and requirements

Duplex wire‑type IQI design: A series of up to 13 duplex wire pairs mounted in a rigid transparent holder. Wires D1–D3 are tungsten; remaining elements are platinum. Wire diameter (d) equals spacing between wires.
Measurement concepts:
- Total image unsharpness (UT) is given by 2·d.
- Basic spatial resolution (SRb) equals half of the measured unsharpness.
- Linepair/mm value is 1/(2·d).
Wire sizes: Duplex elements span fine to coarse pairs (e.g., wire diameters/spacing from ~0.05 mm to ~0.80 mm), enabling resolution readings up to ~10 lp/mm for the finest pairs (values per Table 1 in the standard).
Use limits by X‑ray tube voltage:
- IQIs with up to 13 wire pairs effective up to 600 kV.
- IQIs with more than 13 wire pairs intended for tube voltages <225 kV. Results may be unsatisfactory in the megavolt range.
Evaluation methods:
- Visual evaluation on film/monitor (magnification up to 4×; use >2× lens for very fine pairs).
- Digital evaluation with profile function: determine first duplex pair with

ISO 19232-5:2018 PDF

Technical details

Abstract

Overview

Key topics and requirements

Related standards

Abstract

Overview

Key topics and requirements

Related standards

Systems and software engineering — Software life cycle processes

Asset management — Vocabulary, overview and principles

Asset management — Asset management system — Requirements

Information technology — Radio frequency identification device conformance test methods — Part 2: Test method…

Information technology — Multimedia framework (MPEG-21) — Part 22: User Description

Milk — Determination of the lactoperoxidase activity — Photometric method (Reference method)

Carbonaceous materials for the production of aluminium — Cold and tepid ramming pastes — Expansion/shrinkage…

Agricultural machinery — Safety — Part 13: Large rotary mowers