ISO 19993:2020 PDF

Timber structures — Glued laminated timber — Face and edge joint cleavage test

Open preview (PDF)

Title (English):

ISO 19993:2020

Timber structures — Glued laminated timber — Face and edge joint cleavage test

Document status:: Active
Format:: Electronic (PDF)
Number of pages:: 5
Publication date:: April 14, 2020
Edition:: ISO IS 19993 edition 2 version 1
ICS:: 91.080.20

Delivery type:

Full version25 €Read online 24h10 €Read online 72h15 €

Document language:

enru

Delivery time:Immediate download

Price:25 €

Description (English):

This document specifies methods of evaluating the effectiveness of glued laminated timber face and edge bonds within a manufacturing plant by cleaving of the glue line in both dry and wet conditions. It is not intended that it be used for initial type testing where cyclic delamination or block shear is preferred. It is based on the principle that, provided minimum wood failure percentages are met, then the bond strength exceeds the perpendicular to the grain tension strength of the under-lying substrate and therefore the bond is not the weak element limiting the integrity of a glulam assembly.

Technical details

Technical committee: ISO/TC 165 - Timber structures
SKU: ISO 19993:2020

Abstract

Overview

ISO 19993:2020 - "Timber structures - Glued laminated timber - Face and edge joint cleavage test" specifies a factory quality‑assurance test method for evaluating the effectiveness of glued laminated timber (glulam) face and edge bonds. The standard defines how to cleave the glue line in both dry and wet conditions and assess the percentage of wood failure, confirming whether the bond is stronger than the substrate’s perpendicular‑to‑grain tension strength. It is intended for production batch testing, not for initial type testing where cyclic delamination or block shear methods are preferred.

Key topics and requirements

Scope & principle
- Cleavage of full cross‑section specimens to determine wood failure at bond lines; high wood failure indicates the adhesive is not the weak element.
Specimen preparation
- Specimens taken from off‑cut ends, include full cross‑section, 50 mm long along the grain, with saw kerfs cut to 10 mm depth across each bond line.
Apparatus
- Chisel (blade not touching bottom of saw kerf), hammer/mallet (≥1 kg), saw equipment, autoclave/vessel with vacuum pump (≥65 kPa vacuum) and pressure capability (≥500 kPa).
Wet conditioning
- Vacuum of at least 65 kPa held for 1.5 h, release then (500 ± 30) kPa pressure for 1.5 h; repeat the vacuum‑pressure cycle once. Specimens fully immersed between 10 °C and 27 °C.
Cleaving & assessment
- Cleave each bond line using a chisel and hammer; assess wood failure to the nearest 5% and compute the average wood failure across all bond lines.
Advisory acceptance criteria (Annex A)
- Average wood failure ≥ 60% to be acceptable; any individual bond line

Related standards

Other ISO standards

Overview

Key topics and requirements

Scope & principle
- Cleavage of full cross‑section specimens to determine wood failure at bond lines; high wood failure indicates the adhesive is not the weak element.
Specimen preparation
- Specimens taken from off‑cut ends, include full cross‑section, 50 mm long along the grain, with saw kerfs cut to 10 mm depth across each bond line.
Apparatus
- Chisel (blade not touching bottom of saw kerf), hammer/mallet (≥1 kg), saw equipment, autoclave/vessel with vacuum pump (≥65 kPa vacuum) and pressure capability (≥500 kPa).
Wet conditioning
- Vacuum of at least 65 kPa held for 1.5 h, release then (500 ± 30) kPa pressure for 1.5 h; repeat the vacuum‑pressure cycle once. Specimens fully immersed between 10 °C and 27 °C.
Cleaving & assessment
- Cleave each bond line using a chisel and hammer; assess wood failure to the nearest 5% and compute the average wood failure across all bond lines.
Advisory acceptance criteria (Annex A)
- Average wood failure ≥ 60% to be acceptable; any individual bond line

ISO 19993:2020 PDF

Technical details

Abstract

Overview

Key topics and requirements

Related standards

Abstract

Overview

Key topics and requirements

Related standards

Systems and software engineering — Software life cycle processes

Asset management — Vocabulary, overview and principles

Asset management — Asset management system — Requirements

Information technology — Radio frequency identification device conformance test methods — Part 2: Test method…

Information technology — Multimedia framework (MPEG-21) — Part 22: User Description

Milk — Determination of the lactoperoxidase activity — Photometric method (Reference method)

Carbonaceous materials for the production of aluminium — Cold and tepid ramming pastes — Expansion/shrinkage…

Agricultural machinery — Safety — Part 13: Large rotary mowers