ISO 20805:2017 PDF

Hot-rolled steel sheet in coils of higher yield strength with improved formability and heavy thickness for cold forming

Open preview (PDF)

Title (English):

ISO 20805:2017

Hot-rolled steel sheet in coils of higher yield strength with improved formability and heavy thickness for cold forming

Document status:: Active
Format:: Electronic (PDF)
Number of pages:: 9
Publication date:: November 21, 2017
Edition:: ISO IS 20805 edition 3 version 1
ICS:: 77.140.50

Delivery type:

Full version25 €Read online 24h10 €Read online 72h15 €

Document language:

enru

Delivery time:Immediate download

Price:25 €

Description (English):

ISO 20805:2017 is applicable to continuous hot-rolled steel sheet in coils of higher yield strength with improved formability and heavy thickness for cold forming. The steel can be treated to achieve inclusion control. It is generally used in the as-delivered condition. As a result of the combination of higher strength and improved formability, it is possible to obtain savings in mass along with better weldability. The product is intended for applications where parts are to be fabricated requiring better formability than is provided by normal high-yield-strength steel sheet. The steel sheet is produced in a number of grade designations designed to be compatible with differing application requirements. ISO 20805:2017 does not apply to - steels intended for boilers or pressure vessels, - steels designated as commercial quality, drawing quality or structural quality, - steels rolled to cold-reduced products, - steels designated as weathering steels, having increased atmospheric corrosion resistance, or - those products rolled on a plate mill.

Technical details

Technical committee: ISO/TC 17/SC 12 - Continuous mill flat rolled products
SKU: ISO 20805:2017

Abstract

Overview

ISO 20805:2017 specifies requirements for hot‑rolled steel sheet in coils of higher yield strength with improved formability and heavy thickness for cold forming. It covers continuous hot‑rolled products (commonly 6–25 mm thick and widths ≥600 mm) supplied generally in the as‑delivered (AR) or descaled condition. The standard enables optimized designs where higher strength combined with better formability delivers mass savings and improved weldability for cold‑formed fabricated parts.

Key topics and technical requirements

Scope and exclusions: Applies to hot‑rolled coils for cold forming; excludes steels for boilers/pressure vessels, commercial/drawing/structural qualities, cold‑reduced products, weathering steels, and plate‑mill products.
Chemical composition: Defines heat‑analysis limits (e.g., C ≤ 0.15%, Mn ≤ 1.65%, P ≤ 0.025%, S ≤ 0.030%) and requires microalloying elements (V, Ti, Nb) at minimum levels (e.g., ≥ 0.005%) to achieve higher strength and formability. Limits on Cu, Ni, Cr, Mo and combined sums are specified.
Mechanical properties: Specifies grade designations with minimum yield and tensile strength levels and elongation requirements that vary with thickness - enabling selection of grades (e.g., 325–560 MPa yield classes) appropriate to application needs.
Manufacture and testing: Covers steelmaking discretion, inclusion control options, heat and product analysis procedures, sampling and tensile/impact testing per referenced methods.
Dimensional, shape and coil tolerances: Defines allowable thickness, width and shape tolerances for coils and slit products.
Surface condition and welding: Addresses AR and descaled surfaces, oiling, and notes weldability considerations (scale removal may be needed depending on welding method).
Inspection and marking: Includes requirements for inspection, acceptance, coil size, marking and purchaser information.

Applications and practical value

Ideal for manufacturers and designers of cold‑formed structural components, automotive body or chassis parts, agricultural machinery, and other fabricated parts where mass reduction, higher yield strength, and improved formability are required.
Useful for specifications where better weldability and controlled inclusion morphology (for formability) are important.
Facilitates material selection, supplier communication and quality control for rolled‑coil suppliers, steel mills, fabricators, OEMs and procurement teams.

Who should use ISO 20805:2017

Steel producers and mills issuing hot‑rolled coil products
Engineers and designers specifying materials for cold forming
Quality and inspection personnel verifying chemical and mechanical conformity
Procurement and standards teams preparing purchase orders and acceptance criteria

Related standards

ISO 6892‑1 - Tensile testing of metallic materials (room temperature)
ISO 148‑1 - Charpy pendulum impact test

Keywords: ISO 20805:2017, hot‑rolled steel sheet, higher yield strength, improved formability, cold forming, microalloying, mechanical properties, chemical composition, coil tolerances.

Related standards

Mentioned in the description and other ISO standards

Abstract

Overview

Key topics and technical requirements

Scope and exclusions: Applies to hot‑rolled coils for cold forming; excludes steels for boilers/pressure vessels, commercial/drawing/structural qualities, cold‑reduced products, weathering steels, and plate‑mill products.
Chemical composition: Defines heat‑analysis limits (e.g., C ≤ 0.15%, Mn ≤ 1.65%, P ≤ 0.025%, S ≤ 0.030%) and requires microalloying elements (V, Ti, Nb) at minimum levels (e.g., ≥ 0.005%) to achieve higher strength and formability. Limits on Cu, Ni, Cr, Mo and combined sums are specified.
Mechanical properties: Specifies grade designations with minimum yield and tensile strength levels and elongation requirements that vary with thickness - enabling selection of grades (e.g., 325–560 MPa yield classes) appropriate to application needs.
Manufacture and testing: Covers steelmaking discretion, inclusion control options, heat and product analysis procedures, sampling and tensile/impact testing per referenced methods.
Dimensional, shape and coil tolerances: Defines allowable thickness, width and shape tolerances for coils and slit products.
Surface condition and welding: Addresses AR and descaled surfaces, oiling, and notes weldability considerations (scale removal may be needed depending on welding method).
Inspection and marking: Includes requirements for inspection, acceptance, coil size, marking and purchaser information.

Applications and practical value

Ideal for manufacturers and designers of cold‑formed structural components, automotive body or chassis parts, agricultural machinery, and other fabricated parts where mass reduction, higher yield strength, and improved formability are required.
Useful for specifications where better weldability and controlled inclusion morphology (for formability) are important.
Facilitates material selection, supplier communication and quality control for rolled‑coil suppliers, steel mills, fabricators, OEMs and procurement teams.

Who should use ISO 20805:2017

Steel producers and mills issuing hot‑rolled coil products
Engineers and designers specifying materials for cold forming
Quality and inspection personnel verifying chemical and mechanical conformity
Procurement and standards teams preparing purchase orders and acceptance criteria

Related standards

ISO 6892‑1 - Tensile testing of metallic materials (room temperature)
ISO 148‑1 - Charpy pendulum impact test

Keywords: ISO 20805:2017, hot‑rolled steel sheet, higher yield strength, improved formability, cold forming, microalloying, mechanical properties, chemical composition, coil tolerances.

ISO 20805:2017 PDF

Technical details

Abstract

Overview

Key topics and technical requirements

Applications and practical value

Who should use ISO 20805:2017

Related standards

Related standards

Abstract

Overview

Key topics and technical requirements

Applications and practical value

Who should use ISO 20805:2017

Related standards

Related standards

Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2019)

Intelligent transport systems - Traffic and travel information messages via traffic message coding - Part 2:…

Systems and software engineering — Software life cycle processes

Asset management — Vocabulary, overview and principles

Asset management — Asset management system — Requirements

Information technology — Radio frequency identification device conformance test methods — Part 2: Test method…

Information technology — Multimedia framework (MPEG-21) — Part 22: User Description

Milk — Determination of the lactoperoxidase activity — Photometric method (Reference method)