Overview
ISO 24341:2006 is an international standard developed by the International Organization for Standardization (ISO) that specifies standardized methods for determining the length, width, and straightness of resilient and textile floor coverings in sheet form. This standard is essential to ensure consistent quality and precise measurements for floor covering products, which directly impact installation quality and final appearance.
Floor coverings that deviate excessively from specified dimensions or straight edges can result in installation challenges and aesthetic issues. ISO 24341:2006 sets a reliable framework for manufacturers, suppliers, and testing laboratories to assess these physical characteristics accurately.
Key Topics
-
Measurement Principles
The standard establishes that the length, width, and straightness of the sheet must be measured with the material laid flat on a smooth surface to ensure accuracy.
-
Measurement Equipment
Key apparatus includes:
- Ruler or semi-rigid tape with 0.05% accuracy for width measurement
- Calibrated measuring device such as a measuring wheel or steel tape accurate to 0.1% for length
- String line (minimum 10 meters) for assessing straightness by comparing the edge to a virtual straight line
-
Test Conditions
Specimens must be conditioned at ambient room temperature for at least 4 hours before testing to ensure consistency in results.
-
Specimen Selection
Different length requirements apply depending on what is measured:
- Width measurement: test piece approximately 200 mm in length
- Length measurement: entire roll if possible
- Straightness measurement: minimum 5 meters of sheet length required
-
Measurement Procedures
- Width: measured at three evenly spaced points along the length of the test piece
- Length: measured in two positions parallel to the test piece axis or by re-rolling with a calibrated wheel
- Straightness: measured by the maximum deviation of the sheet edge from a taut string line along the roll’s length
-
Result Expression
Width and straightness measurements are rounded to the nearest 5 mm, length measurements to the nearest 0.05 m. The smallest width measurement determines the effective width.
Applications
ISO 24341:2006 is primarily applied in the flooring manufacturing industry, quality control labs, and construction projects involving resilient or textile flooring products. Its practical applications include:
-
Product Quality Verification
Ensures floor coverings meet strict dimensional tolerances and straightness criteria before shipment or installation.
-
Installation Preparation
Verifying sheet straightness reduces installation errors and improves the final floor aesthetics.
-
Supplier and Manufacturer Communication
Provides a common standardized language for dimension and straightness requirements, aiding contract specifications and acceptance.
-
Regulatory Compliance
Used to comply with national or industry-specific standards referencing international dimension and straightness measurement methods.
Related Standards
- EN 426:1993 – Resilient Floor Coverings: Determination of width, length, straightness, and flatness of sheet material
- JIS A 1454 – Japanese Industrial Standard for resilient floor coverings including test methods for sheet dimensions
- ISO/TC 219 – Technical committee responsible for international flooring standards conformity and updates
These related standards complement ISO 24341:2006 by covering similar or expanded testing scopes relevant to resilient and textile floor coverings.
Keywords: ISO 24341, resilient floor coverings, textile floor coverings, sheet dimension measurement, length measurement, width measurement, straightness testing, flooring quality control, floor covering standards, international flooring standards, floor installation accuracy.
Open preview (PDF)Resilient and textile floor coverings — Determination of length, width and straightness of sheet
