ISO 6162-2:2002 PDF
Hydraulic fluid power — Flange connectors with split or one-piece flange clamps and metric or inch screws — Part 2: Flange connectors for use at pressures of 35 MPa (350 bar) to 40 MPa (400 bar), DN 13 to DN 51
Hydraulic fluid power — Flange connectors with split or one-piece flange clamps and metric or inch screws — Part 2: Flange connectors for use at pressures of 35 MPa (350 bar) to 40 MPa (400 bar), DN 13 to DN 51
- Document status:
- Withdrawn
- Format:
- Electronic (PDF)
- Number of pages:
- 18
- Publication date:
- November 21, 2002
- Edition:
- ISO IS 6162 edition 1 version 1
- ICS:
- 23.100.40
ISO 6162-2:2002 specifies complete general and dimensional characteristics for flange heads, split flange clamps (FCS), one-piece flange clamps (FC) and ports applicable to four-screw, split and one-piece flange clamp type tube and hose connectors for use at pressures of 35 MPa (350 bar) to 40 MPa (400 bar). It also specifies the dimensions of the seals to be used, as well as the grooves to house the seal. ISO 6162-2:2002 also recognizes the need to accommodate metric screw fasteners, as well as to provide a means to use existing inch screw fasteners.
Technical details
- Technical committee
- ISO/TC 131/SC 4 - Connectors and similar products and components
- SKU
- ISO 6162-2:2002
