Overview

ISO 9854-2:2023, "Thermoplastics pipes for the transport of fluids - Determination of Charpy impact properties - Part 2: Test conditions for pipes of various materials," specifies the test parameter choices required when determining Charpy impact properties of thermoplastic pipes. It is a companion to ISO 9854-1 (general test method) and defines the values or options for impact energy, specimen dimensions and type (notched and unnotched), specimen supports, and test temperature for a range of pipe materials using the pendulum (Charpy) method.

Covered materials include: PVC-U, PVC-HI, PVC-O, PVC-C, ABS, ASA, PP-H, PP-B, PP-R, PP-RCT, and PE. Test temperatures allowed include –20 °C, 0 °C and 23 °C, depending on material and pipe size.

Key Topics and Requirements

Scope and applicability: Lists specific thermoplastic materials and clarifies that data from different specimen dimensions are not directly comparable.
Test parameters defined: Specifies impact energy, specimen dimensions, specimen type (notched/unnotched), supports and orientations (longitudinal vs. circumferential).
Methods A and B: Two sets of test-condition tables (Method A - Tables 1–4; Method B - Tables 5–9). Selection depends on material and pipe dimensions; Method B is recommended in certain cases (e.g., thicker PP walls > 10.5 mm).
Material- and size-dependent tables: Detailed tables map pipe nominal outside diameter and wall thickness to the appropriate specimen type, support arrangement and test temperature. Figures and specimen details are referenced to ISO 9854-1.
Test temperatures: Standardizes test temperature choices (23 ±2 °C, 0 ±2 °C, –20 ±2 °C) based on material and intended application.

Applications and Users

ISO 9854-2:2023 is intended for:

Pipe manufacturers performing routine quality control and product development.
Independent testing laboratories executing Charpy pendulum impact tests on pipes.
Materials engineers and R&D teams comparing impact resistance across thermoplastic formulations and pipe designs.
Product standards developers and regulators who reference harmonized test conditions for certification and compliance.
Specifiers and procurement professionals assessing fitness-for-service for fluid transport applications.

Practical uses include establishing repeatable test protocols, comparing material performance under standardized conditions, supporting failure analysis, and informing material selection for impact-critical piping applications.

Related Standards

ISO 9854-1:2023 - Thermoplastics pipes - Determination of Charpy impact properties - Part 1: General test method (normative reference for specimen geometry and test arrangements).

Keywords: ISO 9854-2:2023, Charpy impact properties, thermoplastics pipes, pendulum method, impact resistance testing, PVC, ABS, PP-RCT, PE, test conditions, specimen dimensions.

Overview

Key Topics and Requirements

Scope and applicability: Lists specific thermoplastic materials and clarifies that data from different specimen dimensions are not directly comparable.
Test parameters defined: Specifies impact energy, specimen dimensions, specimen type (notched/unnotched), supports and orientations (longitudinal vs. circumferential).
Methods A and B: Two sets of test-condition tables (Method A - Tables 1–4; Method B - Tables 5–9). Selection depends on material and pipe dimensions; Method B is recommended in certain cases (e.g., thicker PP walls > 10.5 mm).
Material- and size-dependent tables: Detailed tables map pipe nominal outside diameter and wall thickness to the appropriate specimen type, support arrangement and test temperature. Figures and specimen details are referenced to ISO 9854-1.
Test temperatures: Standardizes test temperature choices (23 ±2 °C, 0 ±2 °C, –20 ±2 °C) based on material and intended application.

Applications and Users

ISO 9854-2:2023 is intended for:

Pipe manufacturers performing routine quality control and product development.
Independent testing laboratories executing Charpy pendulum impact tests on pipes.
Materials engineers and R&D teams comparing impact resistance across thermoplastic formulations and pipe designs.
Product standards developers and regulators who reference harmonized test conditions for certification and compliance.
Specifiers and procurement professionals assessing fitness-for-service for fluid transport applications.

Related Standards

ISO 9854-1:2023 - Thermoplastics pipes - Determination of Charpy impact properties - Part 1: General test method (normative reference for specimen geometry and test arrangements).

Keywords: ISO 9854-2:2023, Charpy impact properties, thermoplastics pipes, pendulum method, impact resistance testing, PVC, ABS, PP-RCT, PE, test conditions, specimen dimensions.

ISO 9854-2:2023 PDF

Technical details

Abstract

Overview

Key Topics and Requirements

Applications and Users

Related Standards

Related standards

Abstract

Overview

Key Topics and Requirements

Applications and Users

Related Standards

Related standards

Thermoplastics pipes for the transport of fluids — Determination of Charpy impact properties — Part 1: Genera…

Thermoplastics pipes for the transport of fluids — Determination of pendulum impact strength by the Charpy me…

Systems and software engineering — Software life cycle processes

Asset management — Vocabulary, overview and principles

Asset management — Asset management system — Requirements

Information technology — Radio frequency identification device conformance test methods — Part 2: Test method…

Information technology — Multimedia framework (MPEG-21) — Part 22: User Description

Milk — Determination of the lactoperoxidase activity — Photometric method (Reference method)