This site uses cookies and visit counters for operation and statistics. Privacy policy
Found: 60+
What is ISO 8549-3 about? ISO 8549-3 defines terms relating to orthoses. ISO 8549-3 provides standardized vocabulary of terminologies used for orthoses . Thus, ensuring consistency and eliminating am…
1 Scope This part of ISO 8598 specifies requirements and test methods for general purpose focimeters designed for the measurement of vertex powers, cylinder axis, prismatic power and prism base setti…
1 Scope This part of ISO 8528 specifies the requirements and parameters for the specification and design of a reciprocating internal combustion (RIC) engine driven generating set, with reference to t…
1 Scope This part of ISO 8536 specifies requirements for non-sterile, single-use graduated flow regulators used as subcomponents in sterilized infusion sets for single use to control the flow of intr…
BS ISO 8568:2007 specifies performance parameters and methods of inspection of mechanical shock-testing machines and gives guidelines for describing their characteristics. It is intended to ensure th…
1 Scope This part of ISO 8549 specifies a vocabulary for the description of surgical limb amputations, amputation procedures, and persons who have had an amputation.
1 Scope This part of ISO 8579 specifies the instructions and standardized conditions necessary for the determination of the airborne sound emission of gear units and gearmotors. It also specifies the…
What is ISO 8573-4 - Contaminant measurement of particle content about? ISO 8573-4 reports the particle size and concentration of all types of particles combined. ISO 8573-4 provides a method for sam…
Overview ISO 8536-6:2025 - Infusion equipment for medical use - Part 6: Freeze drying closures for infusion bottles defines the design, materials, performance requirements and labelling for elastomer…
What is ISO 8586- Selection, training and monitoring of selected assessors and expert sensory assessors about? ISO 8586 is an international standard on sensory analysis that discusses the guidance on…
Overview ISO 8551:2020 - Prosthetics and orthotics - Functional deficiencies - provides a standardized method for describing the person to be treated with an orthosis, documenting the clinical object…
Overview ISO 8540:1993 - "Open front mechanical power presses - Vocabulary" is an ISO standard that establishes the accepted terminology for open-front (swan‑neck / C‑frame) mechanical power presses.…
Overview ISO 8525:2008 - "Airborne noise emitted by machine tools - Operating conditions for metal‑cutting machines" specifies the mechanical and acoustical operating conditions needed for reproducib…
Overview - ISO 8543:2020 (Textile floor coverings - Methods for determination of mass) ISO 8543:2020 specifies standardized laboratory methods to determine mass-related properties of textile floor co…
Overview - ISO 8559-5:2023 (Anthropometric measurements for the head and face) ISO 8559-5:2023 specifies a standardized set of anthropometric measurements for the head and face to support the creatio…
Overview ISO 8514-2:2000 establishes a standardized method for measuring the output quality of alphanumeric computer output microform (COM) recorders that utilize a physical form slide. Developed by…
1 Scope This document specifies the requirements for sterilized, single-use, gravity feed infusion sets, used together with the volumetric infusion controllers of IEC 60601‑2‑24 . [ 1 ]
1 Scope This part of ISO 8501 describes preparation grades of welds, edges and other areas, on steel surfaces with imperfections. Such imperfections can become visible before and/or after an abrasive…
1 Scope This International Standard specifies certain characteristics of the oil of lemon [ Citrus limon (L.) Burm. f.], obtained by expression, in order to facilitate assessment of its quality.
1 Scope This Part of ISO 8528 specifies the safety requirements for reciprocating internal combustion (RIC) engine driven generating sets up to 1 000 V consisting of an RIC engine, an alternating cur…
Overview ISO 8528-2:2018 defines the principal characteristics of reciprocating internal combustion (RIC) engines when used to drive alternating-current (a.c.) generating sets. The standard applies t…
Overview ISO 8536-14:2016 defines requirements for non-sterile clamps and flow regulators used as subcomponents in infusion and transfusion equipment where the device does not contact the fluid. The…
Overview - ISO 8529-1:2021 (Neutron reference radiation fields) ISO 8529-1:2021 defines the characteristics and methods of production for neutron reference radiation fields used in radiation protecti…
Overview ISO 8566-5:2017 specifies requirements for cabins and control stations used on overhead travelling cranes and portal bridge cranes (as defined in ISO 4306‑1). The standard addresses cabin co…
Overview ISO 8501-4:2020 specifies visual criteria for assessing the cleanliness of steel substrates after cleaning by water jetting - in particular high-pressure water jetting - prior to the applica…
Overview ISO 8526-2:1990 defines dimensional and mounting features for workholding pallets used as modular units on machine tools, specifically for pallets of nominal size greater than 800 mm. The pa…
Overview ISO 8528-3:2020 defines the principal characteristics and performance requirements for alternating current (a.c.) generators used with reciprocating internal combustion (RIC) engine driven g…
Overview ISO 8531:1986 is an International Standard developed by the International Organization for Standardization (ISO) that defines experimental methods for checking the precision of moisture dete…
Overview ISO 13492:2019 specifies a standardized data element for key management in financial messaging. It defines how information about cryptographic keys is conveyed within ISO 8583-1 interchange…
Overview ISO 8529-3:2023 specifies internationally recognized procedures for the calibration of area and personal neutron dosemeters and doserate meters. The document focuses on calibrating instrumen…
Overview ISO 8528-1:2018 defines application, rating and performance classifications for alternating-current (a.c.) generating sets driven by reciprocating internal combustion (RIC) engines. The stan…
Overview ISO 8542:1986 - "Manganese and chromium ores - Experimental methods for evaluation of quality variation and methods for checking the precision of sampling" - specifies experimental and stati…
Overview ISO 8579-1:2002 - Acceptance code for gear units, Part 1: Test code for airborne sound - defines standardized instructions and conditions for measuring the airborne sound emission of industr…
Overview ISO 8538:1999 defines the dimensions for aerospace hexagonal, self-locking nuts with a counterbore and captive washer using MJ threads. It covers nuts of classification 1 100 MPa (ambient)/2…
Overview ISO 8567:2002 is an international standard developed by the International Organization for Standardization (ISO) that defines the maximum permissible area for subtitles on 35 mm and 16 mm mo…
Overview ISO 856:2006 - Oil of peppermint (Mentha × piperita L.) defines quality characteristics and test requirements for peppermint essential oil to facilitate consistent assessment and trade. Beca…
Overview ISO 8503-1:2012 defines specifications and definitions for ISO surface profile comparators used to assess the surface roughness of blast-cleaned steel substrates. The standard covers the des…
Overview ISO 855:2003 defines quality characteristics and test methods for oil of lemon [Citrus limon (L.) Burm. f.] obtained by expression. Published by ISO/TC 54 (Essential oils), the standard prov…
Overview ISO 8502-2:2017 specifies a laboratory method to determine water‑soluble chloride contamination on steel substrates prior to painting. The standard covers a practical swabbing/wash‑off proce…
