Overview
IEC 60749-21:2011 is an international standard published by the International Electrotechnical Commission (IEC) that defines methods for testing the solderability of semiconductor device package terminations. This standard specifies mechanical and climatic test procedures to evaluate how well device leads and terminations can be joined using tin-lead (SnPb) or lead-free (Pb-free) solder. By providing standardized test methods such as ‘dip and look’ solderability testing and simulated board mounting solderability tests, IEC 60749-21 ensures consistent assessment of semiconductor components intended for solder attachment.
This standard is vital for manufacturers and quality assurance engineers involved in semiconductor packaging and assembly processes. It replaces the earlier 2004 edition, adding Pb-free solder compatibility to address modern electronics production needs.
Key Topics
-
Solderability Testing Scope
The standard covers through-hole, axial leads, and surface mount devices (SMDs), providing test methods to verify solderability before device integration.
-
‘Dip and Look’ Test Procedure
This primary method involves dipping device leads into a controlled solder bath and visually inspecting solder wetting and coverage to assess termination readiness for soldering.
-
Simulated Board Mounting Test for SMDs
An optional reflow solderability test simulates the actual board mounting soldering process to better approximate real application conditions.
-
Ageing Procedures
Optional steam ageing or high temperature storage procedures simulate environmental stress effects on solderability over time.
-
Test Apparatus Requirements
Specifies critical equipment including solder baths with precise temperature controls (±5 °C), mechanical dipping devices, optical microscopes (10× – 20× magnification), and non-corrosive steam ageing vessels.
-
Materials Standards
Defines standard activated rosin flux composition and solder alloy quality conforming to IEC 61190-1-2 and IEC 61190-1-3 for consistency in testing conditions.
-
Destructive Nature of the Test
The solderability test is generally destructive unless otherwise noted, emphasizing careful sample preparation and handling.
-
Exclusions and References
Does not evaluate thermal stresses during actual soldering, for which IEC 60749-15 or IEC 60749-20 should be consulted.
Applications
-
Quality Assurance in Semiconductor Manufacturing
Enables manufacturers to verify that device leads will reliably bond during soldering, reducing assembly defects and improving yield.
-
Component Qualification Testing
Assists in qualifying new semiconductor packages or finishes to ensure they meet industry solderability requirements before use in production.
-
Lead-Free Solder Implementation
Supports transition from traditional tin-lead solder to Pb-free alternatives, ensuring backward compatibility and compliance with environmental regulations.
-
Reliability Assessment in Harsh Environments
Ageing tests simulate long-term exposure to humidity and temperature extremes, informing design decisions for devices used in automotive, aerospace, and industrial electronics.
-
Process Development and Optimization
Provides a reproducible method for evaluating changes in flux formulations, solder alloys, or reflow profiles affecting solder joint quality.
Related Standards
-
IEC 60068 – Environmental testing of electronic components; general principles relating to mechanical and climatic tests.
-
IEC 60749-15 and IEC 60749-20 – Complementary standards addressing semiconductor device testing for thermal shock and soldering thermal stress evaluations.
-
IEC 61190 Series – Specifies requirements for solder pastes and alloys including flux composition critical for solderability tests.
-
JEDEC J-STD-002 – Industry standard for solderability testing of electronic component leads, similar in some test approaches.
-
IPC J-STD-001 – Provides broader guidance on soldering processes and assessment in electronic assembly.
Keywords: IEC 60749-21, solderability testing, semiconductor devices, lead-free solder, tin-lead solder, ‘dip and look’ test, surface mount devices, solder joint quality, solder bath temperature control, steam ageing, semiconductor packaging, mechanical and climatic test methods, IEC standards, electronic assembly testing.
Open preview (PDF)Semiconductor devices - Mechanical and climatic test methods - Part 21: Solderability
