SIST ISO 464:2016 PDF

Rolling bearings - Radial bearings with locating snap ring - Dimensions, geometrical product specifications (GPS) and tolerance values

Title (English):

SIST ISO 464:2016

Rolling bearings - Radial bearings with locating snap ring - Dimensions, geometrical product specifications (GPS) and tolerance values

Document status:: Active
Format:: Electronic (PDF)
Number of pages:: 20
Publication date:: March 22, 2016
ICS:: 21.100.20
Technical committee:: ISEL - Mechanical elements

Document language:

enru

Delivery time:1–7 days

Price:66 €

Description (English):

ISO 464:2015 specifies the snap ring groove dimensions and tolerance values, chamfer dimensions on the snap ring groove side of the outer ring, and the snap ring dimensions and tolerance values for radial bearings in the dimension series 18 and 19 and the diameter series 0, 2, 3, and 4 (except dimension series 00, 82, and 83), as specified in ISO 15.

Technical details

SKU: SIST ISO 464:2016

Abstract

Overview

ISO 464:2015 - "Rolling bearings - Radial bearings with locating snap ring - Dimensions, geometrical product specifications (GPS) and tolerance values" standardizes the geometry and tolerances for snap ring grooves, chamfers and snap rings used with radial rolling bearings. It applies to bearings in dimension series 18 and 19 and diameter series 0, 2, 3 and 4 (excluding series 00, 82 and 83), as referenced in ISO 15. The third edition implements Geometrical Product Specifications (GPS) principles to ensure clear, unambiguous technical product documentation.

Key topics and technical requirements

Snap ring groove dimensions and tolerance values: nominal sizes, two-point size deviations and limit deviations for groove diameter, width and location.
Chamfer dimensions: required chamfer ("r") on the outer ring side of the snap ring groove and related tolerance rules (with maximum chamfer references in ISO 582).
Snap ring dimensions and tolerances: inside/outside diameters, section height, thickness and mounted gap for the matching snap rings.
GPS application: specifies how to indicate dimensional and geometrical characteristics on drawings using ISO GPS rules (ISO 1101, ISO 14405-1). Two-point size is the default specification operator.
Measurement and conformity guidance: references traditional measuring techniques and measurement uncertainty principles; default decision rules per ISO 14253-1 are to be applied.
**Special guidance for small bearings (D

Related standards

Standards mentioned in the description

Overview

Key topics and technical requirements

Snap ring groove dimensions and tolerance values: nominal sizes, two-point size deviations and limit deviations for groove diameter, width and location.
Chamfer dimensions: required chamfer ("r") on the outer ring side of the snap ring groove and related tolerance rules (with maximum chamfer references in ISO 582).
Snap ring dimensions and tolerances: inside/outside diameters, section height, thickness and mounted gap for the matching snap rings.
GPS application: specifies how to indicate dimensional and geometrical characteristics on drawings using ISO GPS rules (ISO 1101, ISO 14405-1). Two-point size is the default specification operator.
Measurement and conformity guidance: references traditional measuring techniques and measurement uncertainty principles; default decision rules per ISO 14253-1 are to be applied.
**Special guidance for small bearings (D

SIST ISO 464:2016 PDF

Technical details

Abstract

Overview

Key topics and technical requirements

Related standards

Abstract

Overview

Key topics and technical requirements

Related standards

Rolling bearings — Radial bearings with locating snap ring — Dimensions, geometrical product specifications (…

Acceptance tests for CO2- laser beam machines for high quality welding and cutting. Measurement of static and…

Resistance welding - Spot welding electrodes - Female electrode caps (ISO 5821:2025)

Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, locatio…

Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2025)

Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment -…